Place Of Installation; Work Environment Conditions; Installation - Corghi Wind-twist Manuel D'utilisation

PLACE OF INSTALLATION

WARNING
The place where the machine is to be installed must conform to applicable safety at
work regulations (fi g.3).
WARNING
The machine must not be installed in an open area.
Move the machine to the designated installation site, taking care to comply with the
minimum safety distances.
- Relative humidity: 30 - 95% (without condensation)
- Temperature: 0° - 55°C
WARNING
The machine must not be operated in potentially explosive atmospheres.
WARNING!
Position the unit at least 60 cm. from any heat source (Fig. 3).
Level using the adjustable feet.
Hook up to the electric mains (see section on ELECTRICAL AND PNEUMATIC HOOK-
UP.
28

Work environment conditions

INSTALLATION

WIND-TWIST operator's manual