Safety Regulations - Corghi Wind-twist Manuel D'utilisation

WARNING
Failure to observe these instructions and the relative danger warnings can cause
serious injury to the operator or other persons.
Do not use the machine until you have read and understood all the danger/warning/
attention notices in this manual.
This machine must be used only by qualifi ed and authorised personnel. A qualifi ed
operator is construed as a person who has read and understood the manufacturer's
instructions, is suitably trained, and is conversant with safety and adjustment proce-
dures to be adhered to during operations. Operators are expressly forbidden from
using the machine under the infl uence of alcohol or drugs capable of affecting physical
and mental capacity.
The following conditions are essential:
- read and understand all the instructions on how to use the machine;
- have a thorough knowledge of the capacities and characteristics of the machine;
- keep unauthorised persons well clear of the area of operation;
- make sure that the machine has been installed in compliance with established legis-
lation and standards;
- make sure that all machine operators are suitably trained, that they are capable of
using the machine correctly and that they are adequately supervised during work;
- do not touch power lines or the inside of electric motors or other electrical equip-
ment until the power has been disconnected;
- read this manual carefully and learn how to use the machine correctly and safely;
- always keep this manual in a place where it can be readily consulted when working
with the machine and do not fail to refer to the manual whenever in need of confi rma-
tion or explanations.
WARNING
Do not remove or deface the Safety, Danger or Instruction decals. Replace any
missing or illegible Safety, Danger or Instruction decals. Replacement decals can
be obtained from your nearest CORGHI dealer.
- When using and carrying out maintenance on the machine, observe the unifi ed
industrial accident prevention regulations for high voltage industrial equipment and
rotating machinery.
- Any unauthorised alterations made to the machine automatically release the manu-
facturer from any liability in the case of damage or accidents as a result of such
alterations. Specifi cally, tampering with or removing the machine's safety devices is a
breach of the regulations for industrial accident prevention.
WARNING
During work and maintenance operations, always tie up long hair and do not wear
loose clothing, ties, necklaces, wristwatches or any other items that may get caught
up in the moving parts.
30

SAFETY REGULATIONS

WIND-TWIST operator's manual