Servo Assignment/Receiver Output Sequence; Mixers; Template: Basic2 - Multiplex ROYALevo 7 Manuel D'utilisation

ROYAL evo 7

20.2. Template: BASIC2

Suitable for powered model aircraft with two aileron
servos (with aileron differential) and flight phase switch-
ing.
Typical models: TwinStar, Cargo, Big-Lift
Aileron
Rudder
ELEVATR+
fixed
assignment
20.2.1. Transmitter controls and switches
Name of assignment:
Physical
Control Note
control
Idle = back
‡
Throttle
Can be altered (
Stick
Spoiler retracted = forward
Spoiler E
Can be altered (
Flap F
L-Gear O Retracts
Aero-tow G
Brake G
Gyro E
Mixture F
AUX1 L Auxiliary channel 1
AUX2 G Auxiliary channel 2
Physical
Switch
control
Dual-Rate switch for
D-R L
aileron, elevator and rudder
CS N Combi-Switch
THR-CUT H EMERGENCY throttle CUT
Runs when throttle stick = forward
‡
Timer
Can be altered (
Stick
Mix-1 I Switch for A/B mixer (
Mix-2 G
Switch for A/B mixer (
Mix-3 L Switch for A/B mixer (
Teacher M Trainer switch
F-PH 1-3 J Flight phase switch
Throttle
e.g.:
tow release,
nosewheel
Aileron
assigned but
vacant
alterable
MOTOR
13.3.3.)
13.3.4.)
17.)
9.2.)
9.2.)
9.2.)
20.2.2. Servo assignment /
receiver output sequence
MPX
1 Aileron
2 ELEVATR+* ELEVATR+* ELEVATR+*
3 Rudder*
4 Throttle
5 Aileron
6 -----
7 -----
Channels with a grey background cannot be changed!
Channels marked "-----" can be assigned freely (
* automatically changes to V-TAIL+ if the V-Tail
mixer is activated (= ON )
( 15.1.).
20.2.3.

Mixers

Mixer Input
V-tail
Combi
Switch
Ail.diff
ELEVATR+ Elevatr
Thr.-Tr
Spoiler
Elevatr
Rudder
V-TAIL+ *
Spoiler
Thr.-Tr
* appears only if the V-tail mixer is activated (= ON ).
Page 60
Hitec Futaba
Aileron Aileron
Throttle Throttle
Rudder* Rudder*
----- -----
Aileron Aileron
----- -----
Note
V-tail mixer
15.1.
Combi-Switch mixer
15.2.
Aileron differential
15.3.
Travel' = Down-elevator travel
Travel# = Up-elevator travel
Elevator compensation for throttle
(motor):
Point1 = Elevator compensation
for half-throttle
Point2 = Elevator compensation
for full-throttle
Elevator compensation for spoilers
(airbrakes):
Point1 = Elevator compensation
for half-extended spoilers
Point2 = Elevator compensation
for fully extended spoilers
Please see the model template:
"BASIC1" ( 20.1. BASIC1 template)
for a detailed description of the in-
puts for this mixer
JR
Throttle
Aileron
ELEVATR+*
Rudder*
-----
Aileron
-----
16.2.).