How To Change Values / Settings; How To Return - Multiplex ROYALevo 7 Manuel D'utilisation

ROYAL evo 7
Press the "ENTER" button or one of the 3D digi-adjustors
to open the sub-menu.
The sub-menu now opens.
(Example "Enter owner's name":
sub-menu "User "):
To help you remember where you are, the first line
again displays the symbol for the associated main
menu, together with the name of the currently selected
sub-menu.
(Example: switching language:
Main menu Setup: "L" / sub-menu " User ")
Note:
If the screen area is not sufficient to list all of the sub-
menus, you will see arrowheads " © " or " ª " at the
edge of the screen. You can then simply "leaf through"
up or down using the UP / DOWN buttons (
one of the two 3D digi-adjustors in order to reach the
start or end of the list. This is similar to "scrolling" in a PC
program. Example:
11.3.3.

How to change values / settings

We will enter the user's name as our example.
Starting from the status display, this is the procedure:
Press the L button.
1.
This takes you to the Setup menu. There you can
select the User sub-menu using the UP / DOWN
buttons ( / ) or one of the two 3D digi-
adjustors. Press ENTER (or one of the 3D digi-
adjustors) to move to the sub-menu.
Now select the Name parameter using the UP /
2.
DOWN buttons ( /
adjustors.
3. To change the settings / parameters (in our exam-
ple "Entering the user's name"
ENTER button or one of the 3D digi-adjustors.
If you are dealing with a % value, you can now
change the selected value / parameter using the
UP / DOWN ( / ) buttons or one of the 3D digi-
adjustors.
In our example "Entering the owner's name" we
will use the keypad to input text (
/ ) or
) or one of the two 3D digi-
Name) press the
11.1.3.).
Press the ENTER button (or press one of the two
3D digi-adjustors) to confirm your input and leave
the input field.
Note regarding storing:
Altered values are stored immediately. It is not
necessary to store information manually.
TIP!
Using the REV/CLR button
The value of a parameter can be altered using either the
UP / DOWN buttons (
adjustors. Many % values can be reversed (or reset to
the default setting) by pressing the REV/CLR button.
11.3.4.

How to return

When you leave the input field, the cursor returns to the
parameter you last selected. In our example "Entering
the owner's name"
To leave the sub-menu and main menu navigate to "¨
Exit " in the second line (Fig. 1) and press the ENTER
button (or one of the two 3D digi-adjustors. Repeat this
procedure until you land back at the status display.
Fig. 1
TIP!
Switching directly to other main menus
If you wish to switch from any menu to another main
menu, you can do this simply by pressing the approp-
riate direct access menu button.
TIP!
Returning to the status display
Pressing any direct access menu button twice takes you
quickly to the status display you last used. Require-
ment: you must not be at a parameter value (in an input
field).
Page 24
/ ) or one of the two 3D digi-
Name :
Fig. 2