Masimo Sensor Setup - Masimo SafetyNet Alert Manuel De L'utilisateur

5. Once the Wi-Fi connection is established, the Bedside Station Wi-Fi Setup Successful
screen will appear. If the Bedside Station cannot connect, follow the on-screen
instructions to verify the network and try again or view
6. Next, you will need to attach the Masimo Sensor and connect it with the Bedside
Station. See

Masimo Sensor Setup

After the Bedside Station is set up, follow the on-screen instructions to:
• Set up the Masimo Sensor.
•
Attach the sensor to your hand.
•
Pair the sensor to the Bedside Station.
• Insert the Masimo Chip into the sensor.
Attaching the Masimo Sensor
Follow the instructions to attach the Masimo Sensor to your hand.
1. Gather all components required for monitoring. See
Overview
2. Remove the sensor from the pouch.
Masimo Sensor Setup
on page 18.
Troubleshooting
on page 22 for additional instructions.
Masimo Sensor and Chip
22
on page 41.