Warnings
X-Smart IQ
•
Only use the original Dentsply Sirona X-Smart IQ
•
X-Smart IQ
products must be replaced.
•
Never press the X-Smart IQ
coming to a stop. This may cause detachment of the endodontic instrument or
overheating of the pushbutton.
•
Never remove the X-Smart IQ
during operation.
•
Only insert the endodontic instrument when the X-Smart IQ
properly attached to X-Smart IQ
•
Never place your fingers on the moving parts of the endodontic instrument while it is
running or coming to a stop.
Endodontic instruments
•
Before use, ensure the endodontic instrument is securely locked in place.
•
Use the torque and speed settings recommended by the endodontic instrument
manufacturer. Preset values in the library must be checked prior to use. Torque
values shown on the Endo IQ
X-Smart IQ
•
Use only undamaged endodontic instruments. Please refer to information provided
by the manufacturer.
•
Follow the file manufacturer's instructions for use of endodontic files.
•
The endodontic file shown on the display must always match the file in use. This is of
utmost importance to avoid misusing reciprocating endodontic files and continuous
rotary endodontic files.
•
Never use continuous rotary endodontic files in reciprocating mode.
•
Never use reciprocating endodontic files in continuous rotary mode.
Cleaning, disinfection and sterilization
See Section
Repairs and Defects
•
Do not use the X-Smart IQ
•
If a defect should occur, contact Dentsply Sirona or your Dentsply Sirona authorized
service partner
END-IFU-X-SMART-IQ-V16-WEB-EUR-Multilingual-2021-01
®
Contra-angle
®
Contra-angle must be checked for damage before reuse. Damaged
®
®
6:1 Contra-angle is properly maintained and lubricated.
7 Cleaning, Disinfection and
®
Handpiece if you suspect damage or a defect.
(telephone +41 21 843 92 92 or fax +41 21 843 92
®
Contra-angle pushbutton when the motor is running or
®
Contra-angle from the X-Smart IQ
®
Handpiece.
®
App are accurate and reliable only if
Sterilization.
Contra-angle.
®
Handpiece
®
Contra-angle is
93).
9/52