Description Of The Sounds; X-Smart Iq Handpiece Connected With Propex Iq; Unconnected Mode - Denstply Sirona X-Smart IQ Protocole D'utilisation

Step by Step Instructions
6.5.3

Description of the Sounds

Mode
Device running in
continuous rotation
Device running in
reciprocating motion
Battery charge level
Motor START/STOP
button
Multifunction button
6.5.4 X-Smart IQ
Locator
X-Smart IQ
See Propex IQ
Ensure that you have the latest version of X-Smart IQ
Apex Locator firmware to work in combined mode.
See Endo IQ
6.5.5

Unconnected mode

X-Smart IQ
This mode is called unconnected mode. Initial set-up requires the connection of X-
Smart IQ
Handpiece is set-up with Endo IQ
settings (i.e. RPM and Torque). See
default setting defines the parameters used in unconnected mode until the next time the
handpiece is connected to Endo IQ
See 6.5.2 Description of the LED Colors
unconnected mode.
END-IFU-X-SMART-IQ-V16-WEB-EUR-Multilingual-2021-01
Intermittent sound when:
• The device is rotating in reverse direction.
• The torque measured is about 75% over the defined torque.
Intermittent sound when:
• The endodontic instrument is subject to increased friction.
• The device is rotating in continuous forward rotation.
Three short beeps when the battery charge level is critically low.
A short beep when pressing the button.
A short beep when pressing the button.
®
Handpiece connected with Propex IQ
®
Handpiece can work in combined mode with Propex IQ
®
Apex Locator Directions for Use -
®
App User Manual -
®
Handpiece can be used without connection to the iPad
®
Handpiece to the iPad
Description
6 Step by Step
®
6 Step by Step Instructions.
® ®
and Endo IQ App. Once the X-Smart IQ
®
App, the user can specify the unconnected motor
6.4.1 First use of X-Smart IQ
®
App.
for X-Smart IQ
®
Apex
®
Apex Locator.
Instructions.
Handpiece and Propex IQ
®
or Endo IQ
®
®
Handpiece. This
®
Handpiece LED status in
®
®
App.
19/52