Torque Reverse Functionality - Denstply Sirona X-Smart IQ Protocole D'utilisation

Step by Step Instructions
Check the current settings of the unconnected mode before using X-Smart IQ
Handpiece.
The user will be unable to change settings without connecting to the Endo IQ
The user will be unable to perform the X-Smart IQ
connecting to the Endo IQ
6.5.6

Torque Reverse Functionality

The Torque Reverse function allows the X-Smart IQ
rotation direction when the applied torque is higher than the maximum defined torque. The
Torque Reverse function can only be enabled or disabled when X-Smart IQ
is connected with Endo IQ
See Endo IQ
Mode
Torque Reverse OFF
Torque Reverse ON
20/52
®
App.
®
App.
®
App User Manual - 6 Step by Step
Explanation – Continuous
Rotation
If the applied torque on X-Smart IQ
maximum defined torque, X-Smart IQ
must press the Motor START/STOP button to restart the motor.
If the applied torque on
®
X-Smart IQ Handpiece is higher
than the maximum defined
torque, X-Smart IQ
automatically rotates in reverse
direction until the applied torque
is lower than a pre-defined
threshold.
®
Contra-angle calibration without
®
Handpiece to automatically reverse
Instructions.
Explanation – Reciprocating
®
Handpiece is higher than the
®
If the applied torque on
X-Smart IQ
than the maximum defined
®
Handpiece
torque, X-Smart IQ
automatically rotates in reverse
direction until the Motor START/
STOP button is pressed.
END-IFU-X-SMART-IQ-V16-WEB-EUR-Multilingual-2021-01
®
®
®
Handpiece
Rotation
Handpiece stops. The user
®
Handpiece is higher
®
Handpiece
App.