Battery Care; Battery Charge And Storage - Denstply Sirona X-Smart IQ Protocole D'utilisation

Step by Step Instructions
6.7

Battery Care

Follow the charging instructions in section 6.7.1 Battery charge and storage and read
the warnings in the battery section in section 3 Warnings.
Charge X-Smart IQ
optimize battery life.
The following notes will help you ensure that the battery provides a long service life:
• If the battery LED on X-Smart IQ
can continue treatment while it is charging.
• Continuous operation with the charger connected shortens the lifetime of the battery.
It is recommended to work without the charging cable connected.
• Charge the battery no more than once a day.
• Charge the battery as soon as the battery LED turns red, at the latest when the LED
starts flashing red.
• Always fully charge the battery, i.e. until the battery LED turns green.
• Charging the battery can take up to six hours, if it is completely empty.
• Autonomy: Two days with 8 treatments per day or 16 total treatments.
6.7.1

Battery charge and storage

N°
When storing X-Smart IQ
A
the On/Off button facing down.
B Plug-in the AC adapter.
Place X-Smart IQ
C
Handpiece Support.
END-IFU-X-SMART-IQ-V16-WEB-EUR-Multilingual-2021-01
®
Handpiece fully before using it for the first time (about 6 hours) to
®
®
Handpiece inside its support, the motor shall be placed with
®
Handpiece Case over X-Smart IQ
Handpiece lights up red, charge the battery. You
Action
®
Handpiece and X-Smart IQ
®
23/52