Totalizer; Test Menu; Offset-Compensation - Burkert 8025 Notice D'utilisation

4 OPERATION

4.3.8 Totalizer

The main and daily totalizers are reset in this menu. The reset procedure only starts when
Enter is pressed, at the "END" position in the parameter definition menu.
ENTER
TOTAL
ENTER
CODE
4.4 Test Menu: Press
The following compensations and tests are carried through in the test menu:
OFFSET
SPAN
FREQUENC
FLOW

4.4.1 Offset-compensation

Here, the customer has the option to correct the basic setting of 4 mA. He only needs one
current meter. When Enter is pressed while "OFFSET" is displayed, the transmitter produces
4 mA. If this value is incorrect, it can be corrected by entering the measured value.
ENTER
OFFSET
ENTER
SPAN
RES NO
RES YES
0......9
Zero-compensation (4 mA).
Span-compensation (20 mA).
Indication of sensor frequency.
Entering the flow rate to be simulated. The outputs will react
in accordance to this input.
Return to the operation mode and storage of new parameters for
END
OFFSET and SPAN. If one of the two values is erroneous, the
device point on "OFFSET", and new values must be entered.
OF = 4.00
0......9
OF = 4.02
FLOW TRANSMITTER 8025
ENTER
simultaneously for 5 seconds
Entering the measured value
E-28-
8025 - 8025RR