• Threading The Lower Looper - ELNA eXtend 264 Livret D'instructions

1
1
1
1
(A)
(A)
(A)
(A)
• Threading the Lower Looper
Open the looper cover and side cover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked in
green.
* A convenient threading chart is placed on the machine
body inside the looper cover.
z Draw the thread through the right side thread guide
from back to front: (A)
* If the thread is coming out from the thread guide groove,
pass the thread through the thread guide hole again as
shown: (B)
q Thread guide
(B)
(B)
(B)
(B)
x Pass the thread through the holes on the right side of
the thread guide plate as illustrated.
w Thread guide plate
c Pass the thread through the right side of the looper
thread guide, sliding the thread from left to right.
e Looper thread guide
26
15
15
15
15