Threading The Machine (3 Threads) - ELNA eXtend 264 Livret D'instructions

28
28

Threading the Machine (3 threads)

Using the needle on the right only
(for regular three-thread serging)
Turn off the power switch and unplug the machine.
Remove the needle and the thread on the left. Then retighten
the needle clamp screw on the left to prevent losing the screw.
q Needle on the right
w Needle clamp screw on the left
Using the needle on the left only
(for wide three-thread serging)
Turn off the power switch and unplug the machine.
Remove the needle and the thread on the right.
Then retighten the needle clamp screw on the right to prevent
losing the screw.
q Needle on the left
w Needle clamp screw on the right
52