ELNA eXtend 264 Livret D'instructions page 34

(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
16
16
16
16
16
v Insert the thread between tension discs from the right.
Then pull both sides of the thread firmly to insert it
between tension discs.
b Pass the thread through lower looper thread guide (1).
r Lower looper thread tension dial
t Lower looper thread guide (1)
* Make sure that the thread is between the tension discs.
a Thread
s Tension discs
n Pass the thread through lower looper thread guide (2).
m Pass the thread through the looper thread take-up
lever (lower).
, Pass the thread through lower looper thread guide (3).
. Pass the thread through lower looper thread guide (4).
y Lower looper thread guide (2)
u Looper thread take-up lever (lower)
i Lower looper thread guide (3)
o Lower looper thread guide (4)
⁄0 Turn the handwheel toward you until the lower looper
comes to the right, and pass the threader through the
hole on lower looper thread guide (5).
Hook the end of the thread on the threader.
(2)
* Looper threader is optional.
(2)
(2)
(2)
(2)
* If you don't have the looper threader, turn the handwheel
towards you until the lower looper comes to its most left
position.
Thread lower looper thread guide (5) from the left side with a
pair of tweezers. Then, turn the handwheel towards you to move
the lower looper to the right position.
!0 Lower looper thread guide (5)
a Lower looper thread
s Looper threader
28