The Position Of Thread Guide Bar; Attaching The Spool Holder Cap And Net (Optional) - ELNA eXtend 264 Livret D'instructions

The Position of Thread Guide Bar

z Pull the thread guide bar up as far as it will go.
1. Pull the thread guide bar up as far as it will go.
1. Pull the thread guide bar up as far as it will go.
x Turn the thread guide bar so that the thread guides are
right above the spool pins.
1. Pull the thread guide bar up as far as it will go.
2. Turn the thread guide bar so that the thread
2. Turn the thread guide bar so that the thread
guides are right above the spool pins.
guides are right above the spool pins.
2. Turn the thread guide bar so that the thread
q Thread guide bar
w Thread guide
guides are right above the spool pins.
Thread guide bar
Thread guide bar
e Stoppers
Thread guide
Thread guide
r Spool pin
Thread guide bar
Stoppers
Stoppers
Thread guide
* Make sure to lock the thread guide of guide pole in the
Spool pin
Spool pin
correct position with the two stoppers. Stoppers
Spool pin

Attaching the Spool Holder Cap and Net (Optional)

z When you use a small thread spool, pull out the spool
holder from the spool pin. Then place the spool with its
slit side up, and put the spool holder cap on top of it.
1. When you use a small thread spool, pull out the
1. When you use a small thread spool, pull out the
q Spool holder
spool holder from the spool pin. Then place the
spool holder from the spool pin. Then place the
1. When you use a small thread spool, pull out the w Spool pin
spool with its slit side up, and put the spool
spool with its slit side up, and put the spool
e Spool holder cap
spool holder from the spool pin. Then place the
holder cap on top of it.
holder cap on top of it.
r Slit
spool with its slit side up, and put the spool
holder cap on top of it.
Spool holder
Spool holder
Spool pin
Spool pin
Spool holder
Spool holder cap
Spool holder cap
Spool pin
Slit
Slit
Spool holder cap
Slit
2. If the thread slips down from the spool
2. If the thread slips down from the spool
x If the thread slips down from the spool during
during threading and/or sewing, put a net on the
during threading and/or sewing, put a net on the
2. If the thread slips down from the spool threading and/or sewing, put a net on the spool as
spool as illustrated to prevent jamming.
spool as illustrated to prevent jamming.
illustrated to prevent jamming.
during threading and/or sewing, put a net on the
* The spool holder cap and net are optional accessories.
spool as illustrated to prevent jamming.
q Net
w Spool pin
Net
Net
Spool pin
Spool pin
Net
Spool pin
10
7
7
7