ELNA eXtend 264 Livret D'instructions page 36

(1)
(1)
(2)
(2)
⁄1 Pull the threader to pass the thread through the hole of
lower looper thread guide (5).
Remove the thread from the threader, and draw the
thread through the hole on the lower looper 10 cm (4˝)
or more with a pair of tweezers.
* For threading without the looper threader, draw the
thread from the right side of lower looper thread guide (5)
with a pair of tweezers.
* And draw the thread through the hole on the lower
looper 10 cm (4˝) or more with a pair of tweezers.
!1 Lower looper
a Looper threader
s Tweezers
NOTE:
How to thread woolly nylon/polyester thread.
* The illustration at left shows one of the easiest ways to
pass woolly nylon/polyester thread through the lower
looper.
q Lower looper
w Ordinary thread
e Woolly nylon/polyester thread
30
17
17