1 2 3 4
1 2 3 4
5 6
5 6
Cleaning the Feed Dog
1. Turn off the power switch and unplug the
Cleaning the Feed Dog
Cleaning the Feed Dog
machine.
z Turn off the power switch and unplug the machine.
1. Turn off the power switch and unplug the
2. Open the looper cover and side cover.
x Open the looper cover and side cover.
machine.
3. Remove the needles and presser foot.
c Remove the needles and presser foot.
Oiling the Machine
2. Open the looper cover and side cover.
v Remove the needle plate set screw, and remove the
4. Remove the needle plate set screw, and remove
3. Remove the needles and presser foot.
needle plate.
the needle plate.
Apply a few drops of fine quality sewing machine oil
q Needle plate
4. Remove the needle plate set screw, and remove
Needle plate
to the parts indicated with arrows.
w Needle plate set screw
the needle plate.
Needle plate set screw
Needle plate
It is recommended to apply oil once a week in
Needle plate set screw
5. Brush out the lint around the feed dogs to the
normal use, once in ten hours in continuous use.
front by using the lint brush or use a vacuum
b Brush out the lint around the feed dogs to the front by
5. Brush out the lint around the feed dogs to the
cleaner.
Oiling the Machine
using the lint brush or use a vacuum cleaner.
front by using the lint brush or use a vacuum
n Reattach the needle plate, presser foot and needles.
6. Reattach the needle plate, presser foot and
Apply a few drops of fine quality sewing machine oil
Close the looper cover and side cover.
cleaner.
needles.
q Feed dog
to the parts indicated with arrows.
6. Reattach the needle plate, presser foot and
Close the looper cover and side cover.
needles.
Feed dog
Oiling the Machine
It is recommended to apply oil once a week in
Close the looper cover and side cover.
normal use, once in ten hours in continuous use.
Feed dog
Apply a few drops of fine quality sewing machine oil
to the parts indicated with arrows.
Oiling the Machine
It is recommended to apply oil once a week in
Open the side cover and apply oil.
Apply a few drops of fine quality sewing machine oil to the parts
normal use, once in ten hours in continuous use.
indicated with arrows.
It is recommended to apply oil once a week in normal use, once
in ten hours in continuous use.
* Open the side cover and apply oil.
Open the side cover and apply oil.
Open the side cover and apply oil.
Open the looper cover and apply oil.
* Open the looper cover and apply oil.
Open the looper cover and apply oil.
Open the looper cover and apply oil.
Carrying the Machine
Carrying the Machine
Put your fingers into the hole on the back side of the
Put your fingers into the hole on the back side of the machine
machine as illustrated.
as illustrated.
Carrying the Machine
72
37
37