Test Stitching Starting Sewing; Finishing Sewing; Sewing Continuously; How To Use Guide Lines - ELNA eXtend 264 Livret D'instructions

24
24 24 24
24
TEST STITCHING
Starting Sewing
z Insert the fabric under the toe of the foot.
(It is not necessary to raise the foot.)
x Turn the handwheel gently toward you a couple of
turns and check the thread chain. Then start sewing
slowly. The fabric will be automatically fed.
Guide the fabric in the desired direction.
* For heavyweight fabric, raise the presser foot and insert
the fabric in front of the knife.
Then lower the foot and start to sew while guiding the
fabric.

Finishing Sewing

z When stitching is completed, continue to run the
machine slowly to produce a thread chain for about 12
cm (5´´) while pulling the thread chain slightly to the
back.
x Cut the threads with the thread cutter as illustrated,
leaving about 5 cm (2´´) thread chain from the end of
the fabric.
q Thread cutter
* The thread cutter becomes blunt as loose threads build
up. Remove the loose threads collected in the thread
cutter.

Sewing Continuously

Insert the next fabric under the toe of the foot, then start sewing.
It is not necessary to raise the presser foot for ordinary fabric.
* For heavyweight fabric, raise the presser foot and insert
the fabric in front of the knife.
Then lower the foot and start to sew while guiding the
fabric.

How to use Guide Lines

On the top of the looper cover are guide lines indicating the
On the top of the looper cover are guide lines
On the top of the looper cover are guide lines On the top of the looper cover are guide lines On the top of the looper cover are guide lines
distance from the needle position. On the top of the looper cover are guide lines
Please use them as sewing guides.
indicating the distance from the needle position.
indicating the distance from the needle position. indicating the distance from the needle position. indicating the distance from the needle position.
indicating the distance from the needle position.
Mark L indicates the distance from the left needle.
Please use them as sewing guides.
Please use them as sewing guides. Please use them as sewing guides. Please use them as sewing guides.
Please use them as sewing guides.
Mark R indicates the distance from the right needle.
The distance between center of guide line and needle position
Mark L indicates the distance from the left needle.
Mark L indicates the distance from the left needle. Mark L indicates the distance from the left needle. Mark L indicates the distance from the left needle.
Mark L indicates the distance from the left needle.
is 5/8 inch.
Mark R indicates the distance from the right needle.
Mark R indicates the distance from the right needle. Mark R indicates the distance from the right needle. Mark R indicates the distance from the right needle.
Mark R indicates the distance from the right needle.
The distance between center of guide line and
The distance between center of guide line and The distance between center of guide line and The distance between center of guide line and
The distance between center of guide line and
needle position is 5/8 inch.
needle position is 5/8 inch. needle position is 5/8 inch. needle position is 5/8 inch.
needle position is 5/8 inch.
44