Device Settings; Display Brightness; Country/Language/Unit - Wilo Stratos GIGA2.0-I Notice De Montage Et De Mise En Service

14

Device settings

14.1

Display brightness

14.2

Country/language/unit

Installation and operating instructions Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D
Device settings
"Settings"
1. "External interfaces" displayed.
The respective settings are described in the display and in the CIF module documenta-
tion.
General settings are made under "Settings"
Device settings
Display brightness
Current: 100 %
Country/language/units
Adaptation of the presentation
Bluetooth On/Off
Current: Switched off
Key lock on
Key lock: Not active
Fig. 89: Device settings
ƒ
Display brightness
ƒ
Country/language/units
ƒ
Bluetooth On/Off
(This setting item only appears if the Wilo-Smart Connect Module BT is plugged
in.)
ƒ
Key lock ON
ƒ
Device information
ƒ
Pump kick
Under "Settings"
1. "Device settings"
2. "Display brightness"
the display brightness can be changed. The level of brightness is shown in a per-
centage. 100 % brightness corresponds to maximum possible, 5 % is the minimum
possible brightness.
Under "Settings"
1. "Device settings"
2. "Country, language, units"
you can set
ƒ
Country
ƒ
language and
ƒ
units for physical values.
Select the country and configure the default setting of the language, physical units and
define the correct contact data for calling local customer service in the help menu.
Choose from over 60 countries and 26 languages.
Selection options of units:
, "Device settings".
Set brightness of the display
and status LEDs
.
en
235