Overview Of The Menus; Factory Settings - Wilo RainSystem AF Comfort Notice De Montage Et De Mise En Service

9.3 Overview of the menus

The following table lists all the menu items
needed for commissioning and operation. Menu
items which need to be enabled by entering a
Menu Description
P: 4.3bar H: cm Default display:
> automatic RW < P: Current system pressure on the pressure side (discharge
side)
H: Filling height or V: filling volume of the collector tank
(depending on the "tank form" selected)
RW: Rainwater from collector tank
DW: Potable water from potable water replenishment reser-
voir
FS: Fault-tolerant software active
FP: Furring protection (prevention of lime deposits) active
FT: Flush time active
1 select opera- Main menu: Select operational mode
tional mode
1.01 mode Selection of the unit's operating mode
(see section 6.1)
> automatic <
1.02 pump manu. Manual switching-on of the pump in manual mode
> OFF < (for manual mode, see menu 1.01)
1.03 valve manu. Manual opening of the valve in manual mode
(for manual mode, see menu 1.01)
> OFF <
1.99 with OK Return to the main menu
back
2 equipment Main menu: Equipment configuration
configuration
2.01 WILO RCE Displays the software version of the unit and its date of issue Vx.xx dd.mm.yyyy
Vx.xx dd.mm.yyyy
2.02 language • Password 01 is required
> English < Choice of menu language
2.04 tank form • Password 01 is required
Selection of tank shape
> standard <
(The tank height (menu 2.05) and the overflow (menu 2.07)
must be entered first)
2.05 tank height • Password 01 is required
> 000 cm < Setting of the tank height (H
2.06 h sensor Height (H) at which the sensor is installed above the tank floor
(absolute value)
> 025 cm <
2.07 h overflow • Password 01 is required
Setting of the height (H) of the overflow above the tank floor
> 000 cm <
(absolute value)
Installation and operating instructions RainSystem AF Comfort
password are marked accordingly.
Menus for after-sales service adjustments are not
shown here. These are listed in a complete listing
of all menus in section 14.3.5.
.
)
max
Parameters

Factory settings

(Display of infor-
mation only)
automatic automatic
OFF
manual
potable water
ON OFF
OFF
ON OFF
OFF
Confirmation with
"OK" button
(Display of infor-
mation only)
Deutsch Deutsch
Nederlands
English
Français
standard standard
verti.cylin.
horiz.cylin.
spherical
base x height
000 – H [cm] 000 cm
max
000 – H [cm] 025 cm
max
H < tank height (display of infor-
(menu 2.05) mation only)
000 – H [cm] 000 cm
max
H > height of sen-
sor (menu 2.06)
H < tank height
(menu 2.05)
English
27