Pre-Defined Applications In The Setting Assistant - Wilo Stratos GIGA2.0-I Notice De Montage Et De Mise En Service

en
11.4 Pre-defined applications in the
setting assistant
System type/control mode
Radiator
Differential pressure Δp-v
Dynamic Adapt plus
Hall temperature T-const.
Underfloor heating
Differential pressure Δp-c
Dynamic Adapt plus
Hall temperature T-const.
Ceiling heating
Differential pressure Δp-c
Dynamic Adapt plus
Hall temperature T-const.
Fan heater
Differential pressure Δp-v
Dynamic Adapt plus
Hall temperature T-const.
Concrete core heating
Differential pressure Δp-c
Dynamic Adapt plus
Feed/return ΔT
Volume flow Q-const.
Hydraulic shunt
198
Setting the control functions
Heating/cooling switchover
Heating
Cooling
Automatic
Binary input
Fig. 52: Heating/cooling switchover_Binary input
The binary input must be set to "Switching heating/cooling" function.
NOTICE
When using the heating/cooling quantity measurement, the energy is automatically
logged in the respective correct counter for heat and cooling energy meter.
The following applications can be selected via the setting assistant:
Pre-defined system types with control modes and optional additional control functions
in the setting assistant
Heating application
No-Flow Stop Q-Limit
X X
X
X X
X
X X
X
X X
X
X X
X
Q-Limit
Max Min
X
The pump switches via
an external signal at the
binary input between
heating and cooling.
Multi-Flow Adaptation
Mixer
WILO SE 2021-12