Battery Change - Wilo Stratos GIGA2.0-I Notice De Montage Et De Mise En Service

Fig. 106: Remove the module fan incl. cable
and rubber sealing
19.2.5

Battery change

Fig. 107: Dismantle the module cover; release
the display and control unit from the locking
mechanism
Installation and operating instructions Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D
Maintenance
4. Remove the module fan and loosen the cable with rubber sealing from the module
lower part.
Installing the module fan
Install the module fan in reverse order.
The battery (button cell CR2032) is positioned under the display.
1. Remove the electronic module cover.
2. Release the display and control unit from the locking mechanism (image) and re-
move the display cable.
en
267