Changing The Preset Values; Switching Off Functions; Switching Off The Sauna Control Unit - Sentiotec Pro C2 Instructions De Montage Et Mode D'emploi

Instructions for use for the user

10.10. Changing the preset values

You can change the preset values at any time during operation.
1. Turn the function selector 2 to the function you want to change.
2. Use the intensity selector 3 to set the preferred preset value.

10.11. Switching off functions

You can switch off each function individually.
1. Turn the function selector 2 to the function you want to switch off.
► The intensity selector 3 lights up.
2. Press the intensity selector 3.
► This respective device is switched off.
► The light on the intensity selector 3 goes out.

10.12. Switching off the sauna control unit

● Press the ON/OFF switch 6, to switch off the sauna control unit.
► The lights go out on the function selector 2, on the intensity selector
and on the intensity level indicator.
► The sauna control unit is switched off.
WORLD OF WELLNESS
p. 39/48
EN