Operation; Switching On The Light; Switching On The Sauna Control Unit - Sentiotec Pro C2 Instructions De Montage Et Mode D'emploi

Instructions for use for the user

10. Operation

10.1. Switching on the light

The light in the sauna room can be switched on and off independently of the
ON/OFF switch 6.
● To switch the light on or off on the power unit, press the light switch 5.
If the light switch 5 is switched on, the sauna room light will operate at
full power. If you wish to dim the light above the intensity selector 3,
switch off the light switch 5.

10.2. Switching on the sauna control unit

WARNING!
Risk of fi re
Flammable objects that are placed on the sauna heater could ignite and
cause fi res.
● NEVER place fl ammable objects on the sauna heater.
● Make sure that NO fl ammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
● Press the ON/OFF switch 6, to switch on the sauna control unit.
► The function selection switch 2 lights up.
Basic operation
1. Turn the function selector 2 to the function (Sauna, Light, Fan,
Additional output) you wish to start.
2. Select the intensity of the function with the intensity selector 3.
3. Press the intensity selector 3 to start the function.
WORLD OF WELLNESS
p. 33/48
EN