Setting The Preset Time - Sentiotec Pro C2 Instructions De Montage Et Mode D'emploi

Instructions for use for the user
When the dimmer switch function is deactivated
When the dimmer switch function for the fan has been deactivated, you can only
switch the fan on and off. The device will always operate at full power.
1. Turn the function selector 2 to position D (fan).
► The fan symbol lights up.
► In the intensity display, "OFF" appears.
2. Press the intensity selector 3.
► The fan switches on.
► The intensity selector 3 lights up.
► In the intensity display, "ON" appears.

10.7. Setting the preset time

You can set the preset time to the minute. The maximum preset time totals
24 hours. The preset time is shown in hours and minutes, e.g. 8 hours and
15 minutes is shown as 8.15.
WARNING!
Risk of fi re
Flammable objects that are placed on the heater will ignite and cause fi res.
● NEVER place fl ammable objects on the sauna heater.
● Make sure that NO fl ammable objects have been placed on the sauna
heater before you activate the preset timer function.
1. Start the function that is to be started after the preset time.
2. Turn the function selector 2 to position E (preset time).
► The most recently set preset time is shown in the intensity display 4.
3. Use the intensity selector 3 to set the preferred preset time.
WORLD OF WELLNESS
p. 37/48
EN