Hold Function; Function Setting; Entering The Function Setting Mode; Setting Of Auto Shut Off Function - Adam Equipment LATITUDE LBX 3 Mode D'emploi

•
the scale will show "xxxxx.x" with the 'HI' LED lit. Otherwise the scale will
show "xxxxx.x" with the 'OK' LED lit.
•
Press the [FUNC/ ↑ ] key to exit and go back to weighing mode.

5.3.4 HOLD FUNCTION

•
When in weighing mode, press [FUNC/ ↑ ] until the display shows "X Hod"
•
Press the [UNITS/ → ] key to go through the holding time of 5,10,20,30, AUTO
or Manual.
•
If AUTO is selected the weight will be automatically held (locked on the
display) when stable until all weight is removed from the scale and the
[HOLD] key is pressed.
If a numeric value is selected the weight will be held only when the [HOLD]
key is
•
For example, if you selected 5 the display will lock for 5 seconds after the
[HOLD] key is pressed. If you selected AUTO, the scale will lock when stable
and hold the value until you press the [HOLD] key.
•
If Manual is selected the [HOLD] key will toggle the display to hold or release
the value when it is pressed.
•
Press [FUNC/ ↑ ] to confirm the value and start hold weighing function.

6.0 FUNCTION SETTING

6.1 ENTERING THE FUNCTION SETTING MODE

•
Press [On/Off] to shut off the power.
•
Press [FUNC/ ↑ ] after press [On/Off] to turn the scale on.
•
The display will show "SLP
backlight, g, lb, oz, lb:oz, bk au, pcs, per, chk.

6.2 SETTING OF AUTO SHUT OFF FUNCTION

•
Press [FUNC/ ↑] to change the setting of this function then press
confirm the change.
•
"SLP 0" means that the function is disabled.
•
"SLP X" means that the auto off function is on. The number is the time in
minutes before the scale will shut off automatically.
© Adam Equipment Company 2020
pressed and it will be held for the number of seconds selected.
Tare/↵
0". Press the [ ] key to go through the
[Tare/↵
7
] to