AOIP calys 60 IS Manuel D'instructions page 70

Switch test
Temperature, signal and pressure switches can be tested using this advanced
procedure. The calibrator will hold the display reading when the contact is closed or
opened.
Multilingual user interface
It displays any text or menu in the most common language.
Over-Voltage protection
The unit is equipped with an advanced system including thermal fuse (auto repair do
not need replacement), high voltage suppressor and resistor-diode voltage limiter.
HART communication
Calys60/80/120 have a built-in option for HART calibration and maintenance. No
external adapter is required. It support the most popular HART transmitters with
device specific commands (pls. check updated list on web site). The flash memory
firmware allows to upgrade to latest models simply using PC software and RS232
cable.
Documenting process calibrator
The calys has a RS232 interface to download up to 100 procedures created with
specific software.. For the HART digital communication, the instrument has to be
connected to the 6-pin Mini-DIN connector on the left side.
Manuel d'intructions NTA47248-300A4
1. Channel 1 Multiconnection binding post
2. Channel 2 Multiconnection binding post
3. LCD graphic display
4. Automatic backlight sensor (not available on IS models)
5. Keyboard
6. HP Pressure input - 1/8" BSPF
7. LP Pressure input - 1/8" BSPF
8. RS232 connector – HART digital communication (optional) - Female MiniDIN 6pin
9. Battery charger connector
70