Keyboard; Display - AOIP calys 60 IS Manuel D'instructions

10. External pressure module connector – Female MiniDIN 8pin
11. Environmental Module (Temperature, Relative Humidity, Barometric) - NOT
available on IS models
12. Digital In/Out connector for Switch Test - NOT available on IS models
3.1

Keyboard

[ ], [ ] keys 5 keys allows you to change (increase/decrease) the
relative digit for Channel 2 output mode.
Numeric pad is used when numeric entry is required.
Character pad is used when text entry is required, to
each pressing the letter changes among the related 3 or
4 ones.
[ ],[ ],[ ],[] the arrow keys allow highlighting menu items or selecting
one
SELECT enter in channels setup.
Decimal point when in calculator or numeric input mode.
RCL/STO recall or memory store up to 10 (from 0 to 9) display
page. The memories store the channels data and setup.
Move cursor up when in configuration and setup menu.
ON/OFF Switch the instrument on and off.

DISPLAY

Recall display mode.
Manuel d'intructions NTA47248-300A4
MENU
CAL PROC
CALC
HOLD/ZERO
STATUS
3.2
The figure shows the features of a typical display. The display shown is in
MEASURE and SOURCE mode.
71
Cancel numeric value when in calculator or numeric
input mode.
Move cursor to the previous menu level when in
configuration and setup menu.
Recall setup and configuration menu.
Transfer the value to output channel when in calculator
mode.
Recall documenting procedures.
Enter in the selected menu option.
Copy the input value to calculator when in calculator
mode.
Enter in Calculator mode.
Arithmetic functions (+, -, x, /, etc) when in calculator
mode.
Data hold and zeroing.
Move cursor down when in configuration and setup
menu.
Enter changes when are in setup mode.
Enter when in calculator mode.
Display auxiliary measuring channels (e.g. environmental
temperature, pressure and relative humidity).
Return in measuring mode when in select or menu mode
without changes.
Display