AOIP calys 60 IS Manuel D'instructions page 101

•
Select the option referring to the following page, flagging "Search for the best
driver in these locations". Press "Browse" to select the file path.
•
Select the folder where the driver is present on the CD:
•
D:\\EE26032-SW-DRIVER USB-Seriale FTDI, then select the folder referred
to your operative system and click "OK". The driver will be automatically
installed on your system.
NOTE: If Windows XP is configured to warn when unsigned (non-WHQL
certified) drivers are about to be installed, your computer will be display
the "Hardware Installation" warning page. Click on "Continue Anyway"
to continue with the installation. If Windows XP is configured to ignore
file signature warnings, no message will appear.
At the end Windows will show a message indicating that the installation was
successful. Click "Finish" to complete the installation.
WARNING
THE ADAPTOR WILL BE CONFIGURED ON YOUR SYSTEM AS A
COMMUNICATION "COM" USB SERIAL PORT, NOT AS A CLASSIC USB PORT.
Manuel d'intructions NTA47248-300A4
INTO THE DEVICE MANAGER OF YOUR PC THE PORT WILL APPEAR IN THE
PLEASE ALSO REMEMBER TO SET BOTH THE CORRECT COM PORT
NUMBER AND THE PORT SPEED IN BAUD ON THE SOFTWARE SETTINGS
THAT YOU ARE RUNNING, OTHERWISE YOU WILL HAVE ANY
COMMUNICATION BETWEEN THE INSTRUMENT AND THE COMPUTER.
101
"COM AND LPT PORT" CATEGORY.