Technical Data - HYDAC ELECTRONIC EDS 820 Notice D'utilisation

10

11 Technical Data

Input data
Measuring Ranges
Overload range
Burst pressures
Mechanical connection
Torque value
Parts in contact with fluid
E
Output data
Output signals
Accuracy to DIN 16086,
Max. setting
Repeatability
Temperature drift
Switching outputs
Version
Switching current
Switching cycles
Reaction time
Long term drift
Parameterisation
Ambient conditions
Compensated temperature range
Operating temperature range
Storage temperature range
Medium temperature range
- mark
Vibration resistance to
IEC 68-2-6 at 10..500Hz
Shock resistance according to
DIN EN 60068-2-29 (11 ms)
Protection class to IEC 60529
Other data
Supply voltage
Residual ripple of supply voltage
Current consumption
Weight
Note: Reverse polarity protection of the supply voltage, overvoltage, override and and short circuit
protection are provided.
FS ( F ull S cale) = relative to the full measuring range
1) -25 °C with FPM seal, -40 °C on request
Edition: 2014-07-11
25 40
50 80
100 200
G 1/4 A ISO 1179-2 (male) (DIN 3852)
with 0.5 mm nozzle
20 Nm
Mech. conn.: Stainless steel
Seal: FPM
Pin 4: IO-Link interface or
freely configurable switch output
Pin 2: freely configurable switch output
≤ ±0.5 % FS typ.
≤ ±1.0 % FS max.
≤ ± 0.1 % FS max.
≤ ± 0.03 % FS / °C max. zero point
≤ ± 0.03 % FS / °C max. range
PNP transistor switching output
250 mA max. each output (ohmic resistance)
> 100 million
< 10 ms
≤ ±0.3 % FS typ./ year
Via IO-Link Interface, see chap. 9
-25 .. +85 °C
1)
-40 .. +85 °C / -25 .. +85°C
-40 .. +100 °C
1)
-40 .. +125 °C / -25 .. +125 °C
EN 61000-6-1 / 2 / 3 / 4
≤ 25 g
≤ 50 g
IP 67 (M12x1 male connector, for use with IP 67 female
connector)
10 .. 32 V DC
≤ 5%
≤ 25 mA
≤ 0.275 A
≤ 0.525 A
≤ 65 g
HYDAC ELECTRONIC GMBH
60 100 250
120 200 500
300 500 1250 2000 2000 bar
with inactive switch outputs
with 1 active switch output
with 2 active switch outputs
EDS 820 IO-Link
400 600 bar
800 1000 bar
Part No.: 669916