Procedure To Override The Immobilizer Using The Throttle Twistgrip - Ducati MONSTER S4Rs Manuel D'utilisation Et Entretien

Masquer les pouces Voir aussi pour MONSTER S4Rs:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Procedure to override the immobilizer using the
throttle twistgrip
1) Turn the key to ON, fully open the throttle and hold it
open.
The EOBD light (7, fig. 4) turns off after 8 seconds.
2) Release the throttle twistgrip as soon as the EOBD light
goes off.
E
3) The EOBD light flashes. Now enter the electronic
release code shown on the CODE CARD given to the
customer when the motorcycle was handed over by the
dealer.
4) Count a number of flashes of the EOBD light equal to
the first number of the secret code.
Open the throttle twistgrip, hold fully open for 2 seconds,
then release it. The digit entered is acknowledged, and the
EOBD light comes on and stays on for the pre-set time of
4 seconds. Repeat the operation until you have entered
the final digit.
If no operation is performed with the throttle twistgrip, the
EOBD light will flash 20 times and then illuminate steadily.
In this case, repeat the procedure from step (1).
5) When you release the throttle, if the code was entered
correctly, the EOBD light flashes to indicate that the
engine is unlocked. The EOBD light returns to its normal
state (off) after 4 seconds.
16
6) If the code has NOT be entered correctly, the EOBD
light remains lit and the procedure can be repeated as
many times as necessary by turning the key to OFF,
then re-starting from step (1).
Notes
If you release the twistgrip too soon, the light comes
on again. Return the ignition key to OFF and repeat the
procedure from step 1.

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Monster s2rMonster s2r dark

Table des Matières