Adjusting The Position Of The Gearchange Pedal - Ducati MONSTER S4Rs Manuel D'utilisation Et Entretien

Adjusting the position of the gearchange pedal

(fig. 16)
The gear change pedal position relative to the footrest may
be adjusted to suit rider preferences.
To adjust the position, proceed as follows:
Apply a wrench to the flats (2) to hold the tie-rod (1) and
loosen the lock nuts (3) and (4).
E
Notes
The locknut (3) has a left-hand thread.
Turn the tie-rod (1) until the gearchange pedal is in the
required position.
Tighten the two lock nuts onto the tie-rod.
3
4
1 2
fig. 16
23