Adjusting The Position Of The Rear Brake Pedal - Ducati MONSTER S4Rs Manuel D'utilisation Et Entretien

Adjusting the position of the rear brake pedal

(fig. 17)
The position of the rear brake pedal in relation to the
footrests can be adjusted to suit the preferred riding
position.
To adjust the position of the rear brake pedal, proceed as
follows:
E
Loosen the locknut (5).
Turn the pedal travel adjustment bolt (6) until the pedal is
in the desired position.
Tighten the locknut (5).
Operate the pedal by hand to check that it has 1.5 to 2 mm
of freeplay before the brake begins to bite.
If not, adjust the length of brake master cylinder pushrod
as follows:
Slacken off the locknut (7) on the pushrod.
Screw the rod (8) into the clevis (9) to increase play,
or unscrew the rod to reduce it.
Tighten the locknut (7) and recheck the pedal freeplay.
24
9
7
8
6
5
fig. 17