Checking coolant level (fig. 43)
Check the coolant level in the expansion tank on the right-
hand side of the motorcycle; it must be between the MAX
and MIN marks on the tank.
1
If the level is low, top it up.
Unscrew the filler cap (1) and add a mixture consisting of
water and antifreeze SHELL Advance Coolant or
E
Glycoshell (35-40% of the volume) up to MAX mark.
Replace the cap (1).
This type of mixture gives the best operating conditions
(the coolant starts to freeze at -20 °C/-4 °F).
3
Cooling circuit capacity: 2,7 dm
(litres).
fig. 43
Warning
This operation must be carried out with the engine
cold and with the motorcycle perfectly level.
47