Right switch
(fig. 21)
1) Switch, light switch, three positions:
right position
= light off;
centre position
number plate and instrument panel lights on;
left position
= headlight, front and rear parking lights,
number plate and instrument panel lights on.
Note
This device is not fitted on the Australia and Japan
E
versions.
2) Switch for ENGINE STOP, two positions:
position
(RUN) = run.
position
(OFF) = stop.
Warning
This switch is mainly intended for use in emergency
cases when you need to stop the engine quickly. After
stopping the engine, return the switch to the
to enable starting.
Important
Riding with the lights on, stopping the engine using
switch (2) and leaving the ignition key in the ON
position, may run the battery flat as the lights will remain
on.
3) Button
= engine start.
28
= front and rear parking lights,
Throttle twistgrip (fig. 21)
The twistgrip (4) on the right handlebar opens the
throttles. When released, it will spring back to the initial
position (idling speed).
position
2
1
4
3
fig. 21