Number plate light (fig. 56)
To access the bulb in the number plate light (3), pull the
bulb holder out from the light, then pull the bulb out of the
holder and renew it.
E
Headlight aim (fig. 57)
To check the headlight aim, place the motorcycle upright
with the tyres inflated to the correct pressure and one
person sitting astride the motorcycle. The motorcycle
should be perfectly vertical, with its longitudinal axis at
right angles to a wall or screen at a distance of 10 metres.
Draw a horizontal line on the wall at the height of the
centre of the headlight and a vertical one in line with the
longitudinal axis of the motorcycle.
If possible, perform this check in conditions of low ambient
light.
Switch on the low beam headlight.
The height of the upper limit between the dark area and
the lit area must not be more than nine tenths of the height
of the centre of the headlamp from the ground.
56
3
fig. 56
9
x
10
10 m
fig. 57
x