LCD functions
When the key is turned from OFF to ON, the instrument
panel runs a check on all instruments (pointers, display,
lights) (fig. 5 and fig. 6).
LCD functions (1)
Press the button (B, fig. 6) with the key turned to ON to
E
switch between display of the trip meter and the odometer.
Resetting the trip meter
Hold down button (B, fig. 6) for more than 2 seconds in
TRIP mode to reset the display (LCD 1).
LCD functions (2)
Press button (A, fig. 6) with the key turned to ON to
display the clock and coolant temperature.
Setting the clock
Press button (B, fig. 6) for at least 2 seconds.
To select AM/PM, press button (B, fig. 6). Press button (B)
to select the hour setting function. Press (A) repeatedly to
change the hour indication. Press button (B, fig. 6) to enter
the minutes setting mode.
Press button (A) to increase the minutes; hold the button
pressed for more than 5 seconds to increase the rate of
change. Press button (B) to exit the clock setting function.
12
OFF:
CHECK
1
A
B
2
fig. 5
fig. 6