Right switch (fig. 10)
1) Switch, light switch, three positions:
right position
= light off;
centre position
= front and rear parking lights,
number plate and instrument panel lights on;
left position
= headlight, front and rear parking lights,
number plate and instrument panel lights on.
2) Switch for ENGINE STOP, two positions:
position
(RUN) = run.
E
position
(OFF) = stop.
Warning
This switch is mainly intended for use in
emergency cases when you need to stop the engine
quickly. After stopping the engine, return the switch to
the
position to enable starting.
Important
Stopping the engine using switch (2) when riding
with lights on and leaving the ignition key in the ON
position, may run the battery flat as the lights will remain
on.
3) Button
= engine start
18
Throttle twistgrip (fig. 10)
The twistgrip on the right handlebar opens the throttles.
When released, it will spring back to the initial position
(idling speed).
Front brake lever (fig. 10)
Pull in the lever (4) towards the twistgrip to operate the
front brake. The system is hydraulically operated and you
just need to pull the lever gently.
Warning
Please read the instructions on pages 35 and 36
before using these controls.
2
1
3
4
fig. 10