Fastening The Oven To The Unit - Steel Cucine GENESI 90x60 Manuel D'utilisation

3.2
Do not use the oven door handle for lifting or
handling, including while unpacking the oven.
The oven must be positioned by two people.
The unit must be coated with heat-resistant material (minimum 90°C).
Leave the minimum clearances suggested in the following diagrams.
Proceed as follows:
•
•
•
•
(*) distance from the wall
46
Instructions for the installer

Fastening the oven to the unit

lighten the oven by removing the box containing the accessories; if necessary, the door can also
be removed by following the instructions in paragraph " 8.1 Removing the oven door";
lift the oven using the handles A on the sides of the oven (see figure);
rest the back of the oven inside the recess and after having freed the electric cable and inserted
the plug into the socket, push the oven into its final position, ensuring that the electric cable is
not crushed; if the oven door has been removed, refit it by following the instructions in paragraph
" 8.1";
fasten the oven to the unit using the wooden screws provided, in the 4 holes on the oven, as
shown in the figures below.
ventilation slot
51 x 457 mm min.
60x60 OVEN
hot air outlet slot
ventilation slot
51 x 457 mm min.
mm