Programming The Cooking Duration - Steel Cucine GENESI 90x60 Manuel D'utilisation

Instructions for the user

PROGRAMMING THE COOKING DURATION

This function is for programming the cooking duration after which the oven switches off
automatically.
Set the required cooking function and temperature using the control knobs;
•
touch the "Mode" key to enter the programming menu, touch again and the word "Dur"
•
appears;
use the / keys to set the cooking duration. The word "Auto" flashes for the duration of the
•
programming phase. After 7 seconds the cooking programme starts and the symbol
appears, while the word "Auto" stops flashing.
At the end of the set cooking time, an audible alarm sounds for 7 minutes, and the symbol
AUTO will flash and symbol
touch any key to stop the alarm or the
•
PROGRAMMING THE COOKING DURATION AND COOKING END
This function is for programming the oven to switch on at a set time and switch off
automatically after cooking.
Set the required cooking function and temperature using the control knobs;
•
touch the "Mode" key to enter the programming menu, touch again and the word "Dur"
•
appears;
use the / keys to set the cooking duration;
•
touch the "Mode" key to display "end", use the
•
The word "Auto" flashes for the duration of the programming phase. After 7 seconds the
programme exits the menu and the word "Auto" stops flashing. When the cooking start time is
reached, the symbol
At the end of the set cooking time, an audible alarm sounds for 7 minutes, and the symbol
AUTO will flash and symbol
touch any key to stop the alarm or the
•
will turn off, switching the oven off automatically;
"Mode" key to delete the programme.
appears and the oven switches on automatically.
will turn off, switching the oven off automatically;
"Mode" key to delete the programme.
/ keys to set the cooking end time.
55