Fastening The Oven To The Unit - Steel Cucine ZS7975 Manuel D'utilisation

3.2
Do not use the oven door handle for lifting or handling, including while
unpacking the oven.
The oven must be positioned by two people.
The unit must be coated with heat-resistant material (minimum 90°C).
Leave the minimum clearances suggested in the following diagram.
Proceed as follows:
•
•
•
(*) distance from the wall
34
Instructions for the installer

Fastening the oven to the unit

lighten the oven by removing the box containing the accessories; if necessary, the door can also
be removed by following the instructions in paragraph " 8.1 Removing the oven door";
rest the back of the oven inside the recess and after having freed the electric cable and inserted
the plug into the socket, push the oven into its final position, ensuring that the electric cable is
not crushed; if the oven door has been removed, refit it by following the instructions in paragraph
" 8.1";
fasten the oven to the unit using the wood screws provided, in the 2 holes on the oven front,
as shown in the figure below.
ventilation slot
51 x 457 mm min.
60x45 OVEN
hot air outlet slot
ventilation slot
51 x 457 mm min.
mm