Safety Regulations; Working In Safety; Operation Safety - WAGNER PLASTMAX Mode D'emploi

GB
1

SAFETY REGULATIONS

1.1

WORKING IN SAFETY

To ensure complete safety, read all the in-
structions in this manual carefully.
This OPERATION AND MAINTENANCE manual must be kept
by the Site Manager and be always available for consultation.
The manual is considered part of the machine and must be
stored for future reference ( EN ISO 12100-2 ) through to scrap-
ping of the machine itself. If the manual is lost or damaged, a
replacement copy can be ordered from the manufacturer.
The manual contains the EC declaration of conformity (2006/42/
EC) important information on construction site procedures, in-
stallation, operation, maintenance and requests for spare parts.
Nevertheless, the user must both have adequate experience
and knowledge of the machine prior to use: the user should
be trained by a person totally familiar with the operation and
use of this machine.
To guarantee complete safety of the operator, safe operation
and long life of equipment, follow the instructions in this ma-
nual carefully, and observe all safety standards currently in force
for the prevention of accidents at work (use of safety footwear
and suitable clothing, helmets, gloves, goggles etc.). In order
to protect your ears wear ear protection.
Make sure that all signs are legible.
It is not permitted to make changes to the
metal structure or systems parts of the
mixing pump.
Wagner accepts no responsibility in the event of damage or
defects on machinery or equipment not supplied by Wagner
and used in combination with Wagner machinery.
Wagner accepts no responsibility in the event of failure to com-
ply with laws governing the use of this type of equipment, with
particular reference to: improper use, incorrect power supply,
lack of maintenance, unauthorised modifications, failure to
comply, either wholly or partially, with the instructions set out
in this manual.
Wagner reserves the right to modify the characteristics of the
mixer and/or contents of this manual, without the obligation
to update the previous machine and/or manuals.
32
The mixing pump is designed for use on
building sites. It is for mixing and pumping
all factory-made premixed mortar, which,
according to the manufacturer are machine
compatible: gypsum plaster, anhydrite, lime
/ cement plaster, heat insulation plaster,
mortar for joint grouting etc.
1.2

OPERATION SAFETY

Before the mixing pump is put into opera-
tion, check whether all protective measures
have been correctly fitted.
Before the mixing pump is put into opera-
tion, check it for visible damage. Particularly
electric cables, plugs and connections.
When the machine is running do not reach
or climb into the funnel or mixing chamber
and do not insert any tools.
Always use the mixer in sufficiently ventila-
ted environments.
Risk of injury from escaping material. Before
switching on, always check that the material
tap on the spray lance is closed. Close mate-
rial tap whenever stopping work.
All of the Wager mixing pump's danger points must be safegu-
arded with suitable protective measures, which must be kept in
perfect working order and must always be correctly mounted.
For example, the cooling filter housing for the electro-motors
and the funnel protection guard, which prevents contact with
the mixer.
In particular, when the motor flange or funnel protection guard
is opened, a safety switch causes the moving machine parts to
come to a stop.
All current standards governing accident prevention and safety
devices must be observed in the workplace.
Take care when handling sacks of material to avoid dispersion
of dust with inhalation of the latter; if this is not possible, masks
must be worn to protect the mouth and nose.
Never use the machine in areas subject to
the risk of explosion/fires or in underground
installations.
The mixer is not equipped with a lighting system and therefore
the workplace must be fitted with adequate lighting.
PlastMax