Tranport; Transport Using A Crane - WAGNER PLASTMAX Mode D'emploi

GB
3
TRANSPORT
CAUTION! Before moving the mixing pump,
always detach the power plug.
Before moving the mixer, disconnect the water supply hose.
Only a minimal amount of the material should be in the hopper
when handling.
Release brake (fig. 5, 1).
Push the mixing pump in the desired direction.
To ease transport, the machine can be taken apart
into motor, container and compressor.
38
1
3.1

TRANSPORT USING A CRANE

CAUTION! Before lifting the mixing pump,
always check that all machine components
are correctly secured and fitted in place and
no objects have been left on the surface.
WARNING! Always disassemble the com-
pressor before lifting the mixing pump and
transport it separately.
CAUTION! Lift with care to avoid hazardous
oscillations.
WARNING! The machine may only be lifted
at the lifting zones shown in fig. 6. Do not
attach any lifting tackle to the cover of the
gear motor.
Use lifting tackle that is suitable for the overall weight of the
machine (191 kg).
To lift the machine, use the two rings (one on each side of the
machine) as shown in the picture below.
PlastMax