Installing The Charger Onto The Optional Mounting Bracket - Stryker SMRT Power System 6500 Manuel D'utilisation Et D'entretien

INSTALLING THE CHARGER ONTO THE OPTIONAL MOUNTING
English
BRACKET
To install the SMRT Charger
onto the optional mounting
bracket:
1. Align the
slots (Figure
the bracket
(Figure 4).
2. Slide the SMRT Charger
in until it locks into the
mounting bracket as shown
in Figure 4. Make sure that
the SMRT Charger is fully
engaged and secured onto
the bracket.
SMRT
Charger
Mounting
Bracket
Return To Table of Contents
1-18
Charger Installation
rear keyway
3) onto
fasteners
Figure 4: Installing the Charger
6500-109-105 REV A
Rear Keyway Slots
Figure 3: Charger Rear Keyway Slots
Bracket
Fasteners
www.stryker.com