Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning and Sanitizing
You are responsible for maintaining the ice machine in
accordance with the instructions in this manual.
Maintenance procedures are not covered by the
warranty.
Clean and sanitize the ice machine every six months for
efficient operation. If the ice machine requires more
frequent cleaning and sanitizing, consult a qualified
service company to test the water quality and
recommend appropriate water treatment. An extremely
dirty ice machine must be taken apart for cleaning and
sanitizing.
Manitowoc Ice Machine Cleaner and Sanitizer are the
only products approved for use in Manitowoc ice
machines.
! Caution
Use only Manitowoc approved Ice Machine Cleaner
and Sanitizer for this application (Manitowoc
Cleaner part number 94-0546-3 and Manitowoc
Sanitizer part number 94-0565-3). It is a violation of
Federal law to use these solutions in a manner
inconsistent
with
understand all labels printed on bottles before use.
! Caution
Do not mix Cleaner and Sanitizer solutions together.
It is a violation of Federal law to use these solutions
in a manner inconsistent with their labeling.
!
Wear rubber gloves and safety goggles (and/or face
shield) when handling ice machine Cleaner or
Sanitizer.
Part Number 000007924 5/14
their
labeling.
Read
Warning
Section 4
Maintenance
CLEANING/SANITIZING PROCEDURE
This procedure must be performed a minimum of once
every six months.
•
The ice machine and bin must be disassembled
cleaned and sanitized.
•
All ice produced during the cleaning and sanitizing
procedures must be discarded.
•
Removes mineral deposits from areas or surfaces
that are in direct contact with water.
PREVENTATIVE MAINTENANCE CLEANING
PROCEDURE
•
This procedure cleans all components in the water
flow path, and is used to clean the ice machine
between the bi-yearly cleaning/sanitizing procedure.
EXTERIOR CLEANING
Clean the area around the ice machine as often as
necessary to maintain cleanliness and efficient
operation.
Wipe surfaces with a damp cloth rinsed in water to
remove dust and dirt from the outside of the ice
machine. If a greasy residue persists, use a damp cloth
and
rinsed in a mild dish soap and water solution. Wipe dry
with a clean, soft cloth.
The exterior panels have a clear coating that is stain
resistant and easy to clean. Products containing
abrasives will damage the coating and scratch the
panels.
•
Never use steel wool or abrasive pads for cleaning.
•
Never use chlorinated, citrus based or abrasive
cleaners on exterior panels and plastic trim.
39
Publicité
Chapitres
Table des Matières
