Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
Energy Saver Menu
From the Main menu, use the Down arrow to navigate to
Energy Saver and press the Checkmark. Set up an
energy saving ice program, enable the Water Miser and
view usage statistics from this menu. Press the Left
arrow to return to previous screens.
Energy Saver
Energy Saver Menu
ICE PROGRAM
To save energy and water, the ice machine can be
programmed to only power up during time periods that
the ice will be used or when the bin level is being
depleted by heavy use.
Important
Setting an ice program will take the ice machine out
of the On/Off Mode and the Power button will be
disabled.
1. In the Energy Saver menu, ensure that Ice Program
is highlighted.
2. Press the Checkmark. On this screen, you can
choose to turn on the time program or the bin level
program by highlighting your choice and pressing
the Checkmark. Selecting one will deselect the
other. If one of them is selected and you wish to turn
both off, highlight the choice and press Checkmark
again.
NOTE: Settings will not be saved if the Checkmark is not
pressed after choosing On or Off.
34
Ice Program
Water Miser
Statistics
Exit
3. If neither of the programs are selected, highlighting
Next and pressing the Checkmark will simply return
to the top of this screen. If one of the programs is
selected, highlight Next and press the Checkmark to
choose the times or bin levels. NOTE: For details on
how to use the cursor for the time program, refer to
"Display Panel Navigation" in this section.
4. Select Exit to return to previous screens and again
to the Energy Saver menu.
WATER MISER
Water Miser is a feature that reduces water usage by
eliminating flush cycles. Enabling this feature is only
recommended for systems with de-ionized or reverse
osmosis filtering.
1. From the Energy Saver menu, use the Down arrow
to highlight Water Miser.
2. Press the Checkmark. On this screen, you can
choose to turn the Water Miser ON or OFF by
highlighting your choice and pressing the
Checkmark. Selecting one will deselect the other.
3. Press the Left arrow to return to previous screens
and to the Energy Saver menu.
STATISTICS
1. From the Energy Saver menu, use the Down arrow
to highlight Statistics.
2. Press the Checkmark. Choose to view ice
production, potable water usage or energy usage
statistics by highlighting your choice and pressing
the Checkmark.
3. Press the Left arrow to return to previous screens
and to the Energy Saver menu.
FACTORY DEFAULTS
The entire setup can be reset to the factory defaults.
1. From the Set-up menu, use the Down arrow to
highlight Fact Deflts.
2. Press the Checkmark two times to reset the ice
machine. The display will return to the Set-up menu.
Section 3
Part Number 000007924 5/14
Publicité
Chapitres
Table des Matières
