Replacing The Oven Lamp - Franke MARIS FREE MA 82 M /F Série Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
EN
Removing and cleaning the intermediate glass
panel of the oven door
After removing the internal glass panel, the intermediate
glass panel can be removed.
Carefully lift the intermediate glass panel out of the
X
X
rubbers on both sides.
Clean the intermediate glass panel.
X
X
Removing and cleaning the upper trims for
glass panels
For more thorough cleaning, the upper trims on the oven
door can be removed. The upper trims are fixed with
two screws, one in the upper right, one in the upper left
corner on the inside of the oven door. It is only possible,
to remove the upper trims when the internal glass is
removed.
Unscrew the fixing screws in the upper right and left
X
X
corner of the oven door.
Remove the upper trim.
X
X
Clean the upper trim.
X
X
Mounting the glass panels
The correct position of the mounted glass panels is
indicated by the wording TEMPERED GLASS which must
be perfectly legible.
If unmounted, put the upper glass trim back in place.
X
X
If unmounted, put the intermediate glass panel back in
X
X
place within the rubbers.
Put the internal glass panel back in place.
X
X
Turn the two glass retaining blocks back to their
X
X
original position.
Close the oven door.
X
X
Cleaning the side frames
To clean the side frames thoroughly they can be removed
from the oven.
Removing the side frames
1
Bend the crosspiece which is engaged in the fixing
X
X
bush downwards and remove it from the groove.
Push the side frame upwards and remove it from the
X
X
two upper hooks.
Cleaning
Clean the side frames.
X
X
After cleaning, keep the side frame tilted and insert the
X
X
side frames into the two respective guides on the top.
Bend the crosspiece which is engaged in the fixing
X
X
bush upwards and insert it in the groove.
MA 82 M _/F

Replacing the oven lamp

Franke ovens are equipped with two rectangular lamps.
The replacement lamp must meet the following technical
specifications:
– Temperature resistance: 300°C
– Voltage: 220-240 V, 50/60 Hz
– Power: 2 x 25 W
– Connection: G9
CAUTION! Damage to the lamp due to wrong handling!
Z
X
Z
X
Z
X
handling!
Z
X
X
X
X
X
X
X
3
X
X
2
– 14 –
Avoid touching the lamps with bare hands.
Use a cloth or a sheet of kitchen paper.
WARNING! Possibility of electric shock!
Ensure that the oven is switched off before replacing
the lamp.
WARNING! Electric shock due to wrong
Switch the oven off.
– Depending on how the oven is installed: Unplug
the oven or disconnect the power at the main
electrical system switch, e.g., switch off the fuse of
the oven in the fuse box.
Remove the glass cover by carefully prying it off with a
flat-blade screwdriver.
Remove the lamp from its holder.
Replace the lamp.
Reattach the glass cover.

Publicité

Table des Matières
loading

Table des Matières