Display Settings - Fronius Primo 3.0-1 Instructions De Service

Date display format
for specifying the date display format
Setting range
Factory setting
Summer/winter time
Activate/deactivate automatic changeover between summer and winter time
IMPORTANT! Only use the automatic summer/winter time changeover function if the
Fronius Solar Net ring does not include any LAN- or WLAN-compatible system com-
ponents (e.g. Fronius Datalogger Web, Fronius Datamanager or Fronius Hybridman-
ager).
Setting range
Factory setting
IMPORTANT! The time and date must be set accurately in order for the day and year
values and for the day characteristic to be displayed correctly.

Display settings

Setting range
Language
Set language for display
Setting range
Night mode
Night mode controls Fronius DATCOM and inverter display operation during the night
or when the DC voltage is insufficient
Setting range
Factory setting
32
mm/dd/yyyy or dd.mm.yy
Depends on country setup
on / off
on
Language / Night mode / Contrast / Illumination
English, German, French, Spanish, Italian, Dutch, Czech,
Slovakian, Hungarian, Polish, Turkish, Portuguese,
Romanian
AUTO / ON / OFF
OFF
AUTO: Fronius DATCOM mode is always in effect as long as there is a Fronius
Datamanager connected in an active and uninterrupted Fronius Solar
Net.
The inverter display remains dark during the night, but can be activated
by pressing any function button.
ON: Fronius DATCOM mode is always in effect. The inverter supplies 12 V of
DC voltage continuously to power the Fronius Solar Net. The display is
always active.
IMPORTANT! If Fronius DATCOM night mode is set to ON or AUTO
when there are Fronius Solar Net components connected, the inverter's
current consumption during the night will increase to around 7 W.