Time/Date; Display Settings - Fronius Galvo 208-240 Instructions De Service

Time/Date

Setting the time, date and automatic adjustment for daylight saving time
Setting range
Set time
Setting the time (hh:mm:ss or hh:mm am/pm, depending on the setting under Time dis-
play format)
Set date
Setting the date (dd.mm.yyyy or mm/dd/yyyy, depending on the setting under Date dis-
play format)
Time display format
For specifying the format in which the time is displayed
Setting range
Factory setting
Date display format
For specifying the format in which the date is displayed
Setting range
Factory setting
Daylight saving time
Activating/deactivating the automatic adjustment for daylight saving time
IMPORTANT! Only use the function for automatic daylight savings adjustment when
there are no LAN or WLAN-compatible system components in a Fronius Solar Net Ring
(e.g., Fronius Datalogger Web, Fronius Datamanager or Fronius Hybridmanager).
Setting range
Factory setting
IMPORTANT! The time and date must be set correctly for day and year values to be dis-
played properly.

Display Settings

Setting range
Language
Setting range
Night Mode
insufficient DC voltage available
Setting range
Factory setting
30
Setting the display language
DATCOM night mode; controls DATCOM and display operation at night or when there is
Set time / Set date / Time display format / Date display format /
Daylight saving time
12 hrs / 24 hrs
depends on the country setup
mm/dd/yyyy / dd.mm.yy
depends on the country setup
on/off
on
Language / Night mode / Contrast / Illumination
German, English, French, Dutch, Italian, Spanish, Czech, Slo-
vak, etc.
AUTO / ON / OFF
OFF