Safety Rules; General; Environmental Conditions - Fronius Primo 3.0-1 Instructions De Service

Safety rules

General

The device has been manufactured in line with the state of the art and according to
recognized safety standards. If used incorrectly or misused, however, it can cause:
-
-
All personnel involved in commissioning, maintenance, and servicing of the device must:
-
-
-
The Operating Instructions must always be at hand wherever the device is being used. In
addition to the Operating Instructions, attention must also be paid to any generally
applicable and local regulations regarding accident prevention and environmental protec-
tion.
All safety and danger notices on the device:
-
-
-
-
The terminals can reach high temperatures.
Only operate the device when all protection devices are fully functional. If the protection
devices are not fully functional, there is a danger of:
-
-
Any safety devices that are not fully functional must be repaired by an authorised spe-
cialist before the device is switched on.
Never bypass or disable protection devices.
For the location of the safety and danger notices on the device, refer to the section
headed "General remarks" in the Operating Instructions for the device.
Any equipment malfunctions which might impair safety must be remedied before the
device is turned on.
This is for your personal safety!
Environmental Operation or storage of the device outside the stipulated area will be deemed as not in
conditions accordance with the intended purpose. The manufacturer accepts no liability for any
damage resulting from improper use.
Qualified person- The servicing information contained in these operating instructions is intended only for
nel the use of qualified service engineers. An electric shock can be fatal. Do not carry out
any actions other than those described in the documentation. This also applies to quali-
fied personnel.
All cables and leads must be secured, undamaged, insulated and adequately dimen-
sioned. Loose connections, scorched, damaged or inadequately dimensioned cables and
leads must be immediately repaired by authorised personnel.
Injury or death to the operator or a third party
Damage to the device and other material assets belonging to the operating com-
pany.
Be suitably qualified
Have knowledge of and experience in dealing with electrical installations and
Have fully read and precisely followed these Operating Instructions
Must be kept in a legible state
Must not be damaged
Must not be removed
Must not be covered, pasted or painted over
Injury or death to the operator or a third party
Damage to the device and other material assets belonging to the operating company
5