Usb Stick As A Data Logger And For Updating Inverter Software; Usb Flash Drive As A Datalogger; Suitable Usb Flash Drives - Fronius Primo 3.0-1 Instructions De Service

USB Stick as a Data Logger and for Updating
Inverter Software
USB flash drive If a USB flash drive is connected to the USB A socket it can function as a datalogger for
as a datalogger an inverter.
At any time, the logging data stored on the USB flash drive can be
-
-
Older versions (before Excel 2007) are limited to a maximum of 65,536 rows.
Further information on "Data on a USB flash drive", "Data volume and storage capa-
city" as well as "Buffer memory" can be found at:
Suitable USB Due to the variety of USB flash drives available on the market, it cannot be guaranteed
flash drives that every USB flash drive will be detected by the inverter.
Fronius recommends that only certified, industry-grade USB flash drives are used (look
out for the USB-IF logo).
The inverter supports USB flash drives with the following file systems:
-
-
-
Fronius recommends that the USB flash drive employed should only be used for record-
ing logging data or updating the inverter software. The USB flash drives should not con-
tain any other data.
imported into the Fronius Solar.access software using the FLD file that was logged
at the same time,
viewed directly in third-party programs (e.g. Microsoft® Excel) using the CSV file
logged at the same time.
® http://www.fronius.com/QR-link/4204260204DE
FAT12
FAT16
FAT32
39